carpenter using miter saw to cut

5 Best 10 Inch Miter Saws In 2023

Most people believe woodworking is merely limited to a set of tools and a piece of wood. However, there’s much more to it. To get the perfect cut, you must have a particular type of tool in your arsenal. A commonly seen cut in woodworking is the miter cut, wherein an angled cut is made across the face, or width, of a board. This type of cut is primarily used for molding, trim work, rafters, etc. Though the miter cut sounds very generic at face value, it can only be achieved using a good quality miter saw.

5 Best 10 Inch Miter Saws In 2021

Miter saws come in a variety of sizes and some even with unorthodox ergonomics. However, what stays constant throughout is the objective that is to get a miter cut. When it comes to using a miter saw, it doesn’t require a lot of learning. But as with any other carpentering tool, one must make sure that they go for the right product at the time of purchasing. Maneuverability must be kept in mind as some miter saws come with an adjustable blade, while some only allow you to fix a specific size of wood for cutting. The cuts produced may also vary slightly depending on the manufacturer. But to make things easy, the market splits miter saws into two main types – 10 inches and 12 inches. In this article, we will be providing you with a list of the five best 10-inch miter saws in 2021, alongside a load of other additional information.

Editor’s Picks: 3 Of The Best 10 Inch Miter Saws In 2021

Table could not be displayed.

5 Best 10 Inch Miter Saws In 2021 Reviewed

Starting it off, we have the TACKLIFE 10-Inch Sliding Miter Saw that comes with a compound nature. In other words, it can produce both miter and bevel cuts. Thanks to its sliding ergonomics, users of this miter saw are allowed to work with more extensive wood than the saw itself. But this product is not limited to just wood, as you may even use it to slice through plastic or metal.

The Tacklife EMS01A miter saw is equipped with three blades: two 10″ 40T TCT blades for wood/plastic and one multifunctional 10″ 48T TCT blade for versatile use. You also get 2-speed levels with this product which come in at 3200 RPM and 4500 RPM. In terms of durability, the brand promises a long-lasting product which is hard to debate against considering that the saw is made out of solid iron self-retracting saw shield and stainless steel castings.

Since working with the saw is likely to release many specks of dust and wood particles, the saw comes with a feature that allows you to connect a chip bag directly to it. Hence, all your woodworking waste gets collected separately. When it comes to the warranty, you get a 2-year warranty with the product.

[wpsm_column size=”one-half”][wpsm_pros title=”PROS:”]

  • Sliding nature allows to work with longer pieces of wood
  • Produces both miter and bevel cuts
  • Chip bag connection feature helps a lot
  • 2-year warranty


[wpsm_column size=”one-half” position=”last”][wpsm_cons title=”CONS:”]

  • May not be the best for commercial use


2. DEWALT DW713 10 in. Portable Compound Miter Saw

Dewalt has established itself as one of the market’s most fantastic when it comes to carpentering tools. Their products are known for their sturdiness and ease of use. The DW713 10-inch Portable Compound Miter Saw is a prime example of such a product. It easily rips through the wood, making woodwork quite simple and satisfying for the user. Being a compound miter saw, you can also use it for other types of cuts.

The DW713 10-inch Portable Compound Miter Saw is equipped with a 15 Amp, 5,000 rpm motor that provides both power and durability. It also comes with a stainless steel miter detent plate and a cam miter lock that provide repeatable accuracy and durability with easy adjustments. For bevel cuts, the saw comes with tall sliding fences.

Despite sporting such a high level of power, the saw only comes in at a weight of 35 pounds. The saw has a built-in carry handle for portability, making it relatively easy to carry around the job site. The brand also caters to beginners. You can also buy a laser attachment (DW7187 adjustable miter saw laser system) separately for the saw to make sure of the cutting path while working. This product’s warranty is also quite impressive as you get a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

[wpsm_column size=”one-half”][wpsm_pros title=”PROS:”]

  • Very high power
  • Easy to use
  • Compound nature allows for numerous types of cuts


[wpsm_column size=”one-half” position=”last”][wpsm_cons title=”CONS:”]

  • Not ideal for large cuts


3. Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw

10 inch miter saws get a bad rap in the world of professional carpentry, with many arguing that they aren’t powerful enough to be used for different types of cuts. While the notion is somewhat correct, the Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw is one of the very few products that go out of the norm.

The C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw is very light in weight, weighing roughly 26 pounds. Despite that, it has a 15 amp motor that is powerful enough for the toughest of woodworking. Its design is quite attractive, while its maneuverability is that even novices can work with it very efficiently.

The saw has a 0 52 Degree miter angle range both towards the left and the right. As for bevel cuts, you get a 0 45 Degree bevel angle range with this product. Since it comes from a reliable brand, you get an insane five years of warranty with this saw.

[wpsm_column size=”one-half”][wpsm_pros title=”PROS:”]

  • Easy to use thanks to the inbuilt laser marker system
  • Very light in weight
  • Compatible with multiple types of material
  • 5 years of warranty


[wpsm_column size=”one-half” position=”last”][wpsm_cons title=”CONS:”]

  • Despite being quite tough, users have complained about the saw not being ideal for cutting metal


woman working with a miter saw

4. Evolution Power Tools R255SMS+ 10″ Multi-Material Compound Sliding Miter Saw Plus

Although miter saws are a revolutionary carpentering tool, they come with the limitation of blade changing. As a result, every time the user wishes to with a different kind of material, they would have to change the blade of their miter saw manually. However, if you purchase the Evolution Power Tools R255SMS+ 10″ Multi-Material Compound Sliding Miter Saw Plus, this problem won’t see the light of day.

The saw’s blade allows users to cut a wide range of materials such as aluminum, plastic pipes, mild steel, wood with nails, etc. As for power, it has a 15 amp hi-torque motor with a top speed of 2500 RPM. It also comes with a laser marker system for high precision. It has a 0° – 45° bevel tilt while also having quick click miter stops at 0˚, 15, 22.5, 30, and 45˚ both left & right in its arsenal. The warranty of this product stands at three years which goes a long way.

[wpsm_column size=”one-half”][wpsm_pros title=”PROS:”]

  • Multipurpose blade
  • Compound nature allows for bevel cuts
  • Laser marker system provides precision
  • 3 years of warranty


[wpsm_column size=”one-half” position=”last”][wpsm_cons title=”CONS:”]

  • Although it has a multipurpose blade, it might not be ideal for cutting stainless steel


5. Makita LS1018 10-Inch Dual Slide Compound Miter Saw

No matter what the industry is, certain brands are always known for providing excellence in a particular attribute. When it comes to Makita, it is durability that is of the highest level. The LS1018 10-Inch Dual Slide Compound Miter Saw is an excellent example of such a product.

The miter saw has a 13.0 AMP direct drive motor with an impressive speed of 4300 RPM. It allows for 0 degrees to 47 degrees left and 0 degrees to 60 degrees right miter cuts with stops set at 0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, and 45 degrees (left and right). The saw has a rear handle bevel lock for bevel cuts that adjusts to 0 degrees and 45 degrees for bevel cuts.

With great power comes a heavyweight, and this product has precisely that. It weighs roughly 45 pounds which makes it quite tough to carry around. However, once set, it is pretty easy to work with due to its laser guidance system. This product’s warranty is 1-year only, though you do get a 30-day satisfaction guarantee on purchase.

[wpsm_column size=”one-half”][wpsm_pros title=”PROS:”]

  • Easy to use
  • Produces both miter cuts and bevel cuts
  • Unmatched power and speed
  • Quite durable


[wpsm_column size=”one-half” position=”last”][wpsm_cons title=”CONS:”]

  • A tad bit heavy


Frequently Asked Questions (FAQs)

Q. What all can I do with a miter saw?

A miter saw can be used for both straight and angular cuts. It is used primarily for producing miter cuts for molding, rafters, etc. However, if you invest in a compound miter saw, you can also make bevel cuts with it.

Q. 10-inch miter saw vs. 12-inch miter saw, which is better?

Considering both of them have a different purpose, there is no winner here. 10-inch miter saws can are compatible with miniature woodwork. On the other hand, 12-inch miter saws are meant for more challenging jobs as they provide deeper cuts.

Q. Are miter saw and chop saw the same?

No. Although a few woodworkers believe these products are similar, they are pretty different from one another. A chop saw can only provide straight cuts, while a miter saw provides more angled cuts. Miter saws also produce bevel cuts.

Q. Can I use a miter saw to cut metal?

Yes and no. Some miter saws come with a rigid blade that can cut through metal easily, while others are built for woodwork and plastic only. Therefore, you should buy a difficult miter saw if you’re looking to work with metal.

Q. Can miter saws cut straight?

Yes. Miter saws do come with the feature of cutting straight even though their forte is to cut in an angled manner.

Q. Do you need a miter saw?

Miter saws are a DIYers paradise. They are easy to use and can be used for multiple purposes. On top of that, the output that you get with a miter saw is unmatched while there’s no going past its compound nature as its users can produce multiple types of cuts on different kinds of materials.

A Final Word

Miter saws are a great tool to have in your inventory if you are a regular in carpentry. Due to their multipurpose nature, even professional contractors can use these saws, making them a no-brainer as an investment. If you are looking for working with light metal, wood, plastic that is 2X6 inches or smaller, it is highly recommended that you buy a 10-inch miter saw. In this article, we listed 5 of our favorite miter saws as of 2021.

On an ending note, we personally recommend you to buy:

It comes with a sliding nature that allows working with longer pieces of wood. It is ideal for making both bevel cuts and miter cuts. Still, its most significant feature is the chip bag accessory connection, ensuring that all waste is collected in a separate place.

Last update on 2023-03-26 / Affiliate links / Images from Amazon Product Advertising API. WaterFilterly is user-supported. We might receive a commission on any purchase you make through clicking links on this page.

Similar Posts